To clean, rinse, disinfect and remove protein daily, these 'rub and rinse'
steps must be completed:
Prior To First Use
Note: For your protection, this bottle has a sealed, built
in dropper tip. Do not use if seal is opened, damaged or missing at time of
purchase.
• Completely remove screw cap from bottle.
• Remove plastic safety ring from bottle neck and discard.
• Replace screw cap on threaded bottle neck.
• To open bottle, turn self-piercing screw cap clockwise to break the
dropper-tip seal.
• Your bottle is ready to use.
• Thoroughly wash hands before handling contact lenses.
Instructions For Use: Rub and rinse' directions are for all
contact lens replacement schedules.
Step 1 - Cleaning and Protein Removal: Completely soak each
side of your contact lens with PrimaLens Multi-Purpose Solution. Rub lens in
the palm of your hand using the forefinger of the other hand for approximately
20 seconds. Be sure to rub and clean both sides. No separate daily cleaner is
necessary.
Step 2 - Rinsing: Thoroughly rinse each side of each lens for
10 seconds with PrimaLens Multi-Purpose Solution to remove all debris.
Step 3 - Disinfection and Storage: Fill your contacts lens
case with PrimaLens Multi-Purpose Solution and place the lenses in the appropriate
storage compartments. Close case and tighten. Allow lenses to soak for at least
4 hours.
Your lenses are now ready to wear. No saline rinse is necessary. If any debris
remains on the contact lenses, rinse with PrimaLens Multi-Purpose Solution.
Always follow your eye care professional's instructions. Based on your individual
tear chemistry and lens-wearing schedule, your eye care professional may recommend
the use of a separate enzymatic cleaner before step 1.
Long-term Storage: Lenses may be stored in the unopened case
until ready to wear, up to a maximum of 30 days. Please dicard bottle 60 days
after opening.
Protein Removal: PrimaLens Multi-Purpose Solution removes
protein from contact lenses while you clean and disinfect.
Note: Always replace PrimaLensTM Multi-Purpose Solution daily.
Never reuse PrimaLensTM Multi-Purpose Solution.
Precautions: To avoid contamination never touch the tip of
bottle to any surface. Keep the bottle tightly closed when not in use.
Contains: PrimaLensTM Multi-Purpose Solution is a sterile,
isotonic, buffered solution containing boric acid, sodium chloride, Hydroxypropyl
Methylcellulose (HPMC) as a lubricant, Poloxamer 407 as a surfactant, disodium
edetate as chelating agent, purified water and preserved with 0.00015% Polyhexanide.
If you are allergic to any of the above ingredients do not use this product.
Keep out of reach of children. Store at room temperature.
Tamper Evident: For your protection, this bottle has a sealed,
built in dropper tip. Do not use if seal is opened, damaged or missing at time
of purchase.
Consult an eye care professional for additional advice on lens care.
